D-Link xStack Reference Manual page 526

xStack
debug ospf virtual_link
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all OSPF virtual link debug flags:
DGS-3627:admin# debug ospf virtual_link state enable
Command: debug ospf virtual_link state enable
Success.
DGS-3627:admin#
debug ospf route state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all OSPF route calculating debug flags:
DGS-3627:admin# debug ospf route state enable
Command: debug ospf route state enable
Success.
DGS-3627:admin#
debug ospf timer state
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the OSPF timer debug flag:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable or disable debug information flags about virtual link.
debug ospf route virtual_link state [enable | disable]
This command is used to enable or disable debug information flags about virtual link.
state - The state of the OSPF virtual link debug flag.
Only Administrator level users can issue this command.
Used to enable or disable debug information flags about OSPF route adding, modifying, and
deleting.
debug ospf route state [enable | disable]
This command is used to enable or disable debug information flags about OSPF route
adding, modifying, and deleting.
state - The state of OSPF route debug flag.
Only Administrator level users can issue this command.
Used to enable or disable debug information flags for the OSPF timer.
debug ospf timer state [enable | disable]
This command is used to enable or disable debug information flags for the OSPF timer.
state - The state of the OSPF timer debug flag.
Only Administrator level users can issue this command.
522