D-Link xStack Reference Manual page 525

xStack
To enable all OSPF SPF debug flags:
DGS-3627:admin# debug ospf spf all state enable
Command: debug ospf spf all state enable
Success.
DGS-3627:admin#
debug ospf route
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all OSPF route calculating debug flags:
DGS-3627:admin# debug ospf route state enable
Command: debug ospf route state enable
Success.
DGS-3627:admin#
debug ospf redistribution
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all OSPF route redistribution debug flags:
DGS-3627:admin# debug ospf redistribution state enable
Command: debug ospf redistribution state enable
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable or disable debug information flags about OSPF route adding, modifying, and
deleting.
debug ospf route state [enable | disable]
This command is used to enable or disable debug information flags about OSPF route
adding, modifying, and deleting.
state - The state of OSPF route debug flag.
Only Administrator level users can issue this command.
Used to enable or disable debug information flags about importing other routing protocol
routes into OSPF.
debug ospf route redistribution state [enable | disable]
This command is used to enable or disable debug information flags about importing other
routing protocol routes into OSPF.
state - The state of OSPF redistribution debug.
Only Administrator level users can issue this command.
521