D-Link xStack Reference Manual page 663

xStack
show super vlan
Restrictions
Example usage:
To show super VLAN:
DGS-3627:admin# show super_vlan
Command: show super_vlan
Super VID : 10
VLAN Name : VLAN10
IP subnet : 10.1.0.0/16
Status : Active
Sub VID : 2-4, 7, 9
Total Entries : 1
DGS-3627:admin#
show sub vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show all sub VLAN:
DGS-3627:admin# show sub_vlan
Command: show sub_vlan
Sub VID Status
------- -------
1 Active
2 Active
3 Inactive
4 Active
5 Inactive
Total Entries: 5
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
vlanid <vlanid 1-4094> - Specify the super VLAN ID.
If not specified the super VLAN, show all super VLANs.
None.
This command is used to show sub VLAN.
show sub_vlan {[<vlan_name 32 > | vlanid <vidlist>]}
This command is used to show sub VLAN.
The "Active" and "Inactive" status means if any ports link up in the sub vlan.
<vlan_name 32> - Specify the sub VLAN name
vlanid <vlanid 1-4094> - Specify the sub VLAN ID list
If not specified the sub VLAN, show all sub VLANs.
None.
Super VID IP Range
---------- ------------------------
10
10
10
20
20
10.1.1.1-10.1.1.10
10.1.2.1-10.1.2.20
10.1.3.0-10.1.3.100
10.1.4.0-10.1.4.255
659