D-Link xStack Reference Manual page 341

xStack
show ipmc
Restrictions
Usage example
To display the current IP multicast interface table by DVMRP entry:
DGS-3627:admin# show ipmc protocol dvmrp
Command: show ipmc protocol dvmrp
Interface Name
---------------
Triton
Total Entries: 1
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
interface table for.
protocol − Allows the user to specify whether or not to use one of the available protocols
to display the IP multicast interface table. For example, if DVMRP is specified, the table
will display only those entries that are related to the DVMRP protocol.
•
inactive – Specifying this parameter will display entries that are currently
inactive.
•
dvmrp – Specifying this parameter will display only those entries that are
related to the DVMRP protocol.
•
pim – Specifying this parameter will display only those entries that are related
to the PIM protocol.
None.
IP Address Multicast Routing
-------------- ----------------
11.1.1.1 DVMRP
337