D-Link xStack Reference Manual page 336

xStack
DGS-3627:admin# show igmp group
Command: show igmp group
Interface Multicast Group
------------ ---------------
System 224.0.0.2
System 224.0.0.9
System 224.0.1.24
System 224.0.1.41
System 224.0.1.149
Total Entries : 5
DGS-3627:admin#
config igmp check_subscriber_source_network
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable igmp check_subscriber_source_network state on interface "System":
DGS-3627:admin# config igmp check_subscriber_source_network ipif System enable
Command: config igmp check_subscriber_source_network ipif System enable
Success.
DGS-3627:admin#
show igmp check_subscriber_source_network
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Last Reporter
---------------
10.42.73.111
10.20.53.1
10.18.1.3
10.1.43.252
10.20.63.11
Used to configure the flag that determines whether or not to check the subscriber source IP
when an IGMP report or leave message is received.
config igmp check_subscriber_source_network [ ipif <ipif_name 12> | all ] [ enable |
disable ]
When check_subscriber_source_network is enabled on an interface, any IGMP report or
leave message received by the interface will be checked to determine whether its source IP
is in the same network as the interface. If the check is disabled, the IGMP report or leave
message with any source IP will be processed by IGMP protocol.
ipif_name - Specifies the IP interface to be configured.
all - All IP interfaces will be configured.
enable - Enable the check state. The default state is enabled.
disable - Disable the check state.
Only Administrator and Operator-level users can issue this command.
Used to display the status of the IGMP report/leave message source IP check.
show igmp check_subscriber_source_network { ipif <ipif_name 12>}
Display the IGMP check_subscriber_source_network status for a single interface or all
interfaces.
ipif_name - Specified the IP interface to be displayed.
If no parameter specified, the system will display all interfaces.
None.
IP Querier
-----------------
10.48.74.122
10.48.74.122
10.48.74.122
10.48.74.122
10.48.74.122
332
IP Expire
---------
260
260
259
259
259