D-Link xStack Reference Manual page 176

xStack
Example usage:
This example sets authorization global state disabled:
DGS-3627:admin# disable authorization attributes
Command: disable authorization attributes
Success.
DGS-3627:admin#
show authorization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays authorization status:
DGS-3627:admin# show authorization
Command: show authorization
Authorization for Attributes: Enabled.
DGS-3627:admin#
config authentication server failover
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to show authorization status.
show authorization
Used to show authorization status.
None.
None.
Used to configure authentication server failover function.
config authentication server failover [local | permit | block]
Description
When authentication server fails, administrator can configure to:
Use local DB to authenticate the client
The switch will resort to using local database to authenticate the client. If the client fails on
local authentication, the client is regarded as un-authenticated, otherwise, it authenticated.
Pass authentication
The client is always regarded as authenticated. If guest VLAN enabled, client will stay at
guest VLAN, otherwise, it will stay at original VLAN.
Block the client (default setting)
The client is always regarded as un-authenticated.
local - Use local DB to authenticate the client.
permit - The client is always regarded as authenticated.
block - Block the client (Default setting)
Only Administrator and Operator-level users can issue this command.
172