D-Link xStack Reference Manual page 300

xStack
create vlan
Purpose Used to create a VLAN on the Switch.
Syntax create vlan <vlan_name 32> {tag <vlanid 2-4094> | type 1q_vlan | advertisement}
Description This command allows the creation of a VLAN on the Switch.
<vlan_name 32> − The name of the VLAN to be created.
Parameters
tag <vlanid 2-4094> − The VLAN ID of the VLAN to be created. Allowed values = 2-4094
type – This parameter uses the type field of the packet header to determine the packet protocol
and destination VLAN:
1q_vlan – Allows the creation of a normal 802.1Q VLAN on the Switch.
advertisement − Specifies that the VLAN is able to join GVRP.
Each VLAN name can be up to 32 characters. Only Administrator and Operator-level users can
Restrictions
issue this command.
Example usage:
To create a VLAN v1, tag 2:
DGS-3627:admin# create vlan v1 tag 2
Command: create vlan v1 tag 2
Success.
DGS-3627:admin#
delete vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the VLAN "v1":
DGS-3627:admin# delete vlan v1
Command: delete vlan v1
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete a previously configured VLAN on the Switch.
delete vlan <vlan_name 32>
This command will delete a previously configured VLAN on the Switch.
<vlan_name 32> − The VLAN name of the VLAN to delete.
Only Administrator and Operator-level users can issue this command.
296