D-Link xStack Reference Manual page 155

xStack
DGS-3627:admin# show bgp
Command: show bgp
BGP Global State
Version
BGP Router Identifier
Synchronization
Enforce First AS
Local AS number
Scan Time
Hold Time
Keep Alive Time
Dampening
Always Compare MED
Deterministics MED
Med Confed
Default Local Preference
AS Path Ignore
Compare Router ID
MED Missing as Worst
Compare Confederation Path
Fast External Fallover
Aggregate Next Hop Check
BGP Trap
DGS-3627:admin#
To display the BGP summary:
DGS-3627:admin# show bgp summary
Command: show bgp summary
BGP Router Identifier
Local AS Number
Dampening
BGP AS Path Entries
BGP Community Entries
Neighbor Ver
----------- --- ----
10.100.1.1 4
10.200.1.1 4
10.200.1.5 4
Total Number of Neighbors: 3
DGS-3627:admin#
show bgp reflection
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the BGP reflection setting:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: Enabled
: 172.16.1.1
: Enabled
: Enabled
: 100
: 60 Seconds
: 300 Seconds
: 100 Seconds
: Enabled
: Disabled
: Disabled
: Disabled
: 200
: Disabled
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: 172.16.1.1,
: 100
: Enabled
: 10
: 7
AS MsgRcvd MsgSent
-------- -------- ----------
200 26
300 21
300 21
This command is used to display the route reflection configuration of BGP.
show bgp reflection
This command displays the BGP route reflection configuration.
None.
None.
: 4
: None
Up/Down
22 00:14:23
51 00:13:40
5 00:10:05
151
State/PfxRcvd
------------
23
0
Idle