D-Link xStack Reference Manual page 279

xStack
DGS-3627:admin# show erps
Command: show erps
ERPS Information
Global Status
Log Status
Trap Status
------------------------
R-APS VLAN
Ring Status
West Port
East Port
RPL Port
RPL Owner
Protected VLANs
Ring MEL
Holdoff Time
Guard Time
WTR Time
Current Ring State
------------------------
R-APS VLAN
Ring Status
West Port
East Port
RPL Port
RPL Owner
Protected VLANs
Ring MEL
Holdoff Time
Guard Time
WTR Time
Current Ring State
------------------------
R-APS VLAN
Ring Status
West Port
East Port
RPL Port
RPL Owner
Protected VLANs
Ring MEL
Holdoff Time
Guard Time
WTR Time
Current Ring State
------------------------
Total Ring: 3
DGS-3627:admin#
config erps trap
Purpose
Syntax
Description
Parameters
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
: Enabled
: Disabled
: Disabled
: 4092
: Enabled
: 5 (Blocking)
: 7 (Forwarding)
: West Port
: Enabled (Active)
: 100-300, 4093, 4094
: 2
: 0 milliseconds
: 500 milliseconds
: 5 minutes
: Idle
: 4093
: Enabled
: Virtual Channel
: 10 (Forwarding)
: None
: Disabled
: 200-220
: 2
: 0 milliseconds
: 500 milliseconds
: 5 minutes
: Idle
: 4094
: Enabled
: Virtual Channel
: 12 (Forwarding)
: None
: Disabled
: 250-300
: 2
: 0 milliseconds
: 500 milliseconds
: 5 minutes
: Idle
Used to configure the trap state of the ERPS.
config erps trap [enable | disable]
This command is used to configure trap state of ERPS events.
trap - Enable or disable trap state. The default value is disabled.
275