D-Link xStack Reference Manual page 198

xStack
enable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DHCP relay function:
DGS-3627:admin# enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3627:admin#
disable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the DHCP relay function:
DGS-3627:admin# disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3627:admin#
show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display dhcp relay status:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable the DHCP relay function on the switch.
enable dhcp_relay
The enable dhcp_relay command enables the DHCP relay function on the switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable DHCP relay function on the switch.
disable dhcp_relay
The disable dhcp_relay command disables the DHCP relay function on the switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the current DHCP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
The show dhcp_relay command displays the current DHCP relay configuration.
ipif - IP interface name.
If no parameter specified, the system will display all dhcp relay configuration.
None.
194