D-Link xStack Reference Manual page 269

xStack
DGS-3627:admin# disable dvmrp
Command: disable dvmrp
Success.
DGS-3627:admin#
show dvmrp routing_table
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DVMRP routing table:
DGS-3627:admin# show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor
---------------
10.0.0.0/8
20.0.0.0/8
30.0.0.0/8
Total Entries: 3
DGS-3627:admin#
show dvmrp neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DVMRP neighbor table:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current DVMRP routing table.
show dvmrp routing table {ipaddress <network_address>}
The command is used to display the current DVMRP routing table.
ipaddress <network_address> − The IP address and netmask of the destination. The
address and mask information can be specified using the traditional format (for
example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
---------------
10.90.90.90
20.1.1.1
30.1.1.1
Used to display the DVMRP neighbor table.
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
This command will display the current DVMRP neighbor table.
<ipif_name 12> − The name of the IP interface for which to display the DVMRP
neighbor table.
ipaddress <network_address> − The IP address and netmask of the destination.
The address and mask information can be specified using the traditional format
(for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
Metric Learned
---- -------
1 Local
2 Dynamic
2 Dynamic
265
Interface Expire
------------ ------
System -
ip2 117
ip3 106