D-Link xStack Reference Manual page 266

xStack
Example usage:
To configure the DNS Resolver state to enabled:
DGS-3627:admin# enable dns_resolver
Command: enable dns_resolver
Success.
DGS-3627:admin#
disable dns_resolver
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the DNS Resolver state to disabled:
DGS-3627:admin# disable dns_resolver
Command: disable dns_resolver
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to configure the DNS Resolver state of the switch to disabled.
disable dns_resolver
The disable dns_resolver command is used to configure the switch's DNS Resolver state to
disabled.
None.
Only Administrator and Operator-level users can issue this command.
262