D-Link xStack Reference Manual page 313

xStack
DGS-3627:admin# show vlan_translation
Commands: show vlan_translation
Port CVID SVID
------ ----- -----
1 10
1 20
1 30
2 10
2 20
Total Entries: 5
DGS-3627:admin#
create vlan_translation ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To replace C-Tag which CVID is 20 by S-Tag, S-VID is 200, at UNI Port 1:
DGS-3627:admin# create vlan_translation ports 1 replace cvid 20 svid 200
Command: create vlan_translation ports 1 replace cvid 20 svid 200
Success.
DGS-3627:admin#
To Add S-Tag, S-VID is 300, to a packet which CVID is 30 at UNI Port 1:
DGS-3627:admin# create vlan_translation ports 1 add cvid 30 svid 300
Command: create vlan_translation ports 1 add cvid 30 svid 300
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Action Priority
------ --------
100 Add 4
100 Add 5
200 Add 6
100 Add 7
100 Add 1
Use this command to create the CVID VLAN translation rules.
create vlan_translation ports [<portlist> | all ] cvid <vidlist> [add | replace] svid <vlanid
1-4094> {priority <value 0-7>}
Use this command to create the CVID VLAN translation rules.
portlist - A range of ports on which the S-VLAN will be translated to C-VLAN
add - The action indicates to add a tag for the assigned S-VLAN before the C-VLAN tag.
replace - The action indicates to replace the C-VLAN tag with the SP VLAN.
cvid - Specify the C-VLAN ID to match.
svid - Specify the S-VLAN ID.
Only Administrator and Operator-level users can issue this command.
309