D-Link xStack Reference Manual page 112

xStack
DGS-3627:admin# debug bgp show redist_list
Command: debug bgp show redist_list
Last redistribution count summary:
Type Route_count_rib
------ ---------------- --------------- ---------
OSPF 0
RIP 0
STATIC 0
LOCAL 0
Redistributed routes summary:
Network
-------
Total entry: 0
Redist list information:
No redist list exist!
DGS-3627:admin#
debug bgp show as_path_access_list
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Configure BGP to show the current BGP path access list information:
DGS-3627:admin# debug bgp show as_path_access_list
Command: debug bgp show as_path_access_list
BGP AS Path Access List 1
deny (_64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_)
permit 33
Total entry: 1
DGS-3627:admin#
debug bgp show community_list
Purpose
Syntax
Description
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
total_count
0
0
0
0
Type Route_map
---- ---------
This command is used to display the current BGP path access list configuration in the BGP
protocol stack.
debug bgp show as_path_access_list
This command is used to display the current BGP path access list configuration in the BGP
protocol stack.
None.
Only Administrator level users can issue this command.
This command is used to display the current community list configuration in the BGP protocol
stack.
debug bgp show community_list
This command is used to display the current community list configuration in the BGP protocol
stack.
Time(msec)
0
0
0
0
Metric Next_hop
------ -------------
108