D-Link xStack Reference Manual page 46

xStack
To create a VLAN named "guestVLAN" as 802.1X guest VLAN:
DGS-3627:admin# create 802.1x guest_vlan guestVLAN
Command: create 802.1x guest_vlan guestVLAN
Success.
DGS-3627:admin#
delete 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the guest VLAN named "guestVLAN":
DGS-3627:admin# delete 802.1x guest_vlan guestVLAN
Command: delete 802.1x guest_vlan guestVLAN
Success.
DGS-3627:admin#
config 802.1x guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Enable on port 1 – 8 to configure 802.1X guest VLAN:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to delete guest VLAN configuration.
delete 802.1x guest_vlan { < vlan_name 32 > }
The delete 802.1x guest_vlan command will delete guest VLAN setting, but not delete the
static VLAN. All ports which enabled guest VLAN will remove to original VLAN after deleted
guest VLAN.
<vlan_name 32> - Specify the static VLAN to be guest VLAN.
Only Administrator and Operator-level users can issue this command.
Used to configure guest VLAN settings.
config 802.1x guest_vlan ports [ < portlist > | all ] state [ enable | disable ]
The config 802.1x guest_vlan command configures guest VLAN setting.
If the specific port state is changed from enabled state to disable state, this port will move to
its original VLAN.
ports - A range of ports enable or disable guest VLAN function.
state - Specify the guest VLAN port state of the configured ports.
enable - join the guest VLAN.
disable - remove from guest VLAN.
Only Administrator and Operator-level users can issue this command.
42