D-Link xStack Reference Manual page 733

xStack
debug vrrp vr_state_change
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the VRRP virtual router state change debug flag:
DGS-3627:admin# debug vrrp vr_state_change state enable
Command: debug vrrp vr_state_change state enable
Success.
DGS-3627:admin#
debug vrrp packet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable all VRRP packet debug flags:
DGS-3627:admin# debug vrrp packet all state enable
Command: debug vrrp packet all state enable
Success.
DGS-3627:admin#
debug vrrp mac_addr_update
Purpose
Syntax
Description
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable or disable the VRRP debug flag for VR state change.
debug vrrp vr_state_change state [enable | disable]
This command is used to enable or disable the VRRP debug flag for VR state change.
state - The state of the VRRP change debug flags. The default setting is disabled.
enable - Enable the VRRP state change debug flags.
disable - Disable the VRRP state change debug flags.
Only Administrator level users can issue this command.
Used to enable or disable VRRP debug flags about packet receiving and sending.
debug vrrp packet [all | {receiving | sending}(1)] state [enable | disable]
This command is used to enable or disable VRRP debug flags for packet receiving and
sending.
all - Set VRRP all packet debug flags.
receiving - Set the VRRP packet receiving flag.
sending - Set the VRRP packet sending flag.
enable - Enable the designated flags.
disable - Disable the designated flags.
Only Administrator level users can issue this command.
Used to enable or disable VRRP debug flags for virtual MAC address operations.
debug vrrp mac_addr_update state [enable | disable]
This command is used to enable or disable VRRP debug flags for virtual MAC address
operations.
729