D-Link xStack Reference Manual page 469

xStack
DGS-3627:admin#debug stp show counter ports 9
Command: debug stp show counter ports 9
STP Counters
--------------------------------------
Port 9 :
Receive:
Total STP Packets
Configuration BPDU
TCN BPDU
RSTP TC-Flag
RST BPDU
Discarded:
Total Discard BPDU
Global STP Disable
Port STP Disabled
Invalid Packet Format :0
Invalid Protocol
Config BPDU Length
TCN BPDU Length
RST BPDU Length
Invalid Type
Invalid Timers
Success.
DGS-3627:admin#
debug stp clear counter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear all STP counters on the switch:
DGS-3627:admin#debug stp clear counter all
Command : debug stp clear counter all
Success.
DGS-3627:admin#
debug stp state
Purpose
Syntax
Description
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
:32
:0
:0
:15
:32
:0
:0
:0
:0
:0
:0
:0
:0
:0
Used to clear STP counters.
debug stp clear counter [ports < portlist > | all ]
This command used to clear the STP counters.
ports <portlist> - Specifies the port range.
all - Clears all port counters.
Only Administrator and Operator-level users can issue this command.
Used to configure the STP debug state.
debug stp state [enable | disable]
This command is used to enable or disable the STP debug state.
Transmit:
Total STP Packets
Configuration BPDU
TCN BPDU
RSTP TC-Flag
RST BPDU
465
:32
:0
:0
:7
:32