D-Link xStack Reference Manual page 649

xStack
config box_id
Parameters
Restrictions
Example usage:
To configure the Switch that has a current box ID of 1 to have an automatic ID assigned by the Switch:
DGS-3627:admin# config box_id current_box_id 1 new_box_id auto
Command: config box_id current_box_id 1 new_box_id auto
Success.
DGS-3627:admin#
show stack_information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the stack information:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
current_box_id - Specifies the switch being configured. The parameter range is 1-12. For
example, for the DGS34xx series the ID is 12; for the DGS36xx series the ID is 8.
new_box_id - Specifies the new ID that will be assigned to the box. The parameter range is
1-12.
auto - Allows the box ID to be assigned automatically by the stack system. The new box ID
will take effect after the next reboot.
Only Administrator and Operator-level users can issue this command.
Used to display the stack information.
show stack_information
The show stack_information command displays stacking information.
None.
None.
645