D-Link xStack Reference Manual page 445

xStack
DGS-3627:admin# enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DGS-3627:admin#
disable mac_based_access_control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the MAC-based Access Control global state:
DGS-3627:admin# disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DGS-3627:admin#
config mac_based_access_control password
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the MAC-based Access Control password:
DGS-3627:admin# config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
DGS-3627:admin#
config mac_based_access_control method
Purpose
Syntax
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to disable MAC-based Access Control.
disable mac_based_access_control
This command disables the MAC-based Access Control function.
None.
Only Administrator and Operator-level users can issue this command.
Used to configure the RADIUS authentication password for MAC-based Access Control.
config mac_based_access_control password <passwd 16>
This command will set the password that will be used for authentication via the RADIUS
server.
<passwd 16> - In RADIUS mode, the switch will communicate with the RADIUS server using
this password. The maximum length of the key is 16.
Only Administrator and Operator-level users can issue this command.
Used to configure the MAC-based Access Control authentication method.
config mac_based_access_control method [local | radius]
441