D-Link xStack Reference Manual page 441

xStack
DGS-3627:admin# config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DGS-3627:admin#
show mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the Switch's MAC address table notification global settings:
DGS-3627:admin# show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-3627:admin#
show mac_notification ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all port's MAC address table notification status settings:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the Switch's MAC address table notification global settings
show mac_notification
This command is used to display the Switch's MAC address table notification global settings.
None.
None.
Used to display the Switch's MAC address table notification status settings
show mac_notification ports {<portlist>}
This command is used to display the Switch's MAC address table notification status settings.
<portlist> – Specify a port or group of ports to be viewed. The beginning and end of the port list
range are separated by a dash. Non-contiguous portlist entries are separated by a comma.
(ex: 1-3,7-9)
Entering this command without the parameter will display the MAC notification table for all
ports.
None.
437