D-Link xStack Reference Manual page 182

xStack
save config
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the configuration:
DGS-3627:admin#save config 123
Command: save config 123
Saving all configurations to NV-RAM.......... Done.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to save the current configuration to a file.
save config {<drive_id>} <pathname 64>
Used to save the current configuration to a file. This command is required to be supported
regardless of whether file system is supported or whether multiple configuration files are
supported. The configuration will only save to the master unit.
<drive_id> - Specify the drive ID here.
pathname - The pathname specifies the absolute pathname on the device file system.
If pathname is not specified, it refers to the boot up configuration file.
Only Administrator and Operator-level users can issue this command.
178