D-Link xStack Reference Manual page 499

xStack
DGS-3627:admin# show ospfv3 neighbor
Command: show ospfv3 neighbor
Router ID of Interface
Neighbor Name
--------------- ------------ -------- -------------
10.10.10.10 System
20.20.20.20 ip1
Total Entries: 2
DGS-3627:admin# show ospfv3 neighbor 10.10.10.10 ipif System
Command: show ospfv3 neighbor 10.10.10.10 ipif System
Neighbor ID: 10.10.10.10
Neighbor Options: 19
Neighbor State: Full
Interface ID: 1
Total Entries: 1
DGS-3627:admin#
show ospfv3 virtual_neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display OSPFv3 virtual neighbor:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Neighbor Neighbor
Priority State
1
10
Used to display OSPFv3 virtual neighbor information.
show ospfv3 virtual_neighbor {<area_id> <neighbor_id>}
This command is used to display OSPFv3 virtual neighbor information.
<area_id> - Specify the transit area where the virtual neighbor is built. If none of the
parameters are set, all virtual neighbors will be displayed.
<neighbor_id> - Specify the ID of the virtual neighbor. If none of the parameters are set, all
virtual neighbors will be displayed.
None.
Full
Full
Interface Name: System
Neighbor Priority: 255
State Changes: 6 times
495