D-Link xStack Reference Manual page 563

xStack
DGS-3627:admin# config pim cbsr bootstrap_period 60
Command: config pim cbsr bootstrap_period 60
Success.
DGS-3627:admin#
show pim cbsr
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the CBSR settings:
DGS-3627:admin# show pim cbsr
Command: show pim cbsr
PIM Candidate-BSR Table
C-BSR Hash Mask Len
C-BSR Bootstrap Period
Interface
---------------------
Zira
System
Total Entries: 2
DGS-3627:admin#
show pim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the PIM settings:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the Candidate BSR settings of the switch, along with CBSR parameters
configured for the Switch.
show pim cbsr {ipif <ipif_name12>}
This command will display the settings for Candidate BSRs that are accessible to the switch.
This command is for PIM-SM configurations only.
<ipif_name 12> − Enter the name of the IP interface for which to display settings. Entering
no name will display all CBSRs.
None.
: 30
: 2
IP Address
---------------------
11.1.1.1/8
10.53.13.30/8
Used to display the PIM settings, along with PIM parameters configured for the Switch.
show pim {ipif <ipif_name12>}
This command will display the settings for the PIM function that are accessible to the switch.
<ipif_name 12> − Enter the name of the IP address for which to display settings. Entering no
name will display all PIM IP interfaces.
None.
Priority
------------
4
-1 (Disabled)
559