D-Link xStack Reference Manual page 270

xStack
DGS-3627:admin# show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface Neighbor Address
--------------- -----------------
System 10.2.1.123
Total Entries: 1
DGS-3627:admin#
show dvmrp nexthop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display DVMRP routing next hop table:
DGS-3627:admin# show dvmrp nexthop
Command: show dvmrp nexthop
DVMRP Routing Next Hop Table
Source Addresss/Netmask
-----------------
10.0.0.0/8
10.0.0.0/8
20.0.0.0/8
20.0.0.0/8
30.0.0.0/8
30.0.0.0/8
Total Entries: 6
DGS-3627:admin#
show dvmrp
Purpose
Syntax
Description
Parameters
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Generation ID
--------------
2
Used to display the current DVMRP routing next hop table.
show dvmrp nexthop {ipaddress <network_address> | ipif <ipif_name 12>}
This command will display the DVMRP routing next hop table.
<ipif_name 12> − The name of the IP interface for which to display the current DVMRP routing
next hop table.
ipaddress <network_address> − The IP address and netmask of the destination. The address
and mask information can be specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
Interface Name
---------------
ip2
ip3
System
ip3
System
ip2
Used to display the current DVMRP settings on the Switch.
show dvmrp{<ipif_name 12>}
The command will display the current DVMRP configurations.
<ipif_name 12> − This parameter will allow the user to display DVMRP settings for a specific IP
interface.
Expire Time
---------
35
Type
------
Leaf
Leaf
Leaf
Leaf
Leaf
Leaf
266