D-Link xStack Reference Manual page 651

xStack
config stacking force_master_role
Parameters
Restrictions
Example usage:
To enable the stacking force master role state:
DGS-3627:admin# config stacking force_master_role state enable
Command: config stacking force_master_role state enable
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
current stacking topology. If the state is enabled, the master's priority will become zero after
the stacking has stabilized.
force_master_role - Used to enable or disable the switch's Stacking Force Master Role state.
The default setting is disabled.
Only Administrator and Operator-level users can issue this command.
647