D-Link xStack Reference Manual page 366

xStack
disable address_binding nd_snoop
Description
Parameters
Restrictions
Example usage:
To disable the DHCPv6 snooping function on the switch:
DGS-3627:admin# disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
DGS-3627:admin#
show address_binding nd_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show ND snooping state:
DGS-3627:admin# show address_binding nd_snoop
Command: show address_binding nd_snoop
ND Snoop : Enabled
DGS-3627:admin#
show address_binding nd_snoop binding_entry
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the ND snooping binding entry:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
This command allows the user to disable ND Snooping on switch.
None.
Only Administrator and Operator-level users can issue this command.
Use to display the status of ND snooping on the switch.
show address_binding nd_snoop
This command allows the user to display the ND snooping state on the switch.
None.
None.
Used to show binding entries of ND snooping on the switch.
show address_binding nd_snoop binding_entry {port <port>}
This command allows the user to display binding entries of ND Snooping on the switch.
port - Specify port number
If no parameter is specified, it will show all ND snooping binding entries.
None.
362