D-Link xStack Reference Manual page 617

xStack
Example usage:
To show user authentication method:
DGS-3627:admin# show ssh authmode
Command: show ssh authmode
The SSH authmode
Password : Enabled
Publickey : Enabled
Hostbased : Enabled
DGS-3627:admin#
config ssh user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To update user "test" authmode:
DGS-3627:admin# config ssh user test publickey
Command: config ssh user test publickey
Success.
DGS-3627:admin#
show ssh user authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show user information about ssh configuration:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to update user information for ssh configuration.
config ssh user <username 15> authmode [hostbased [hostname <domain_name 32> |
hostname_IP <domain_name 32> <ipaddr>] | password | publickey]
The config ssh user command update the ssh user information.
username - Specifies the User name.
publickey - Specifies user authentication method.
password - Specifies user authentication method.
hostbased - Specifies user authentication method.
hostname - Specifies host domain name.
hostname_ip - Specifies host domain name and ipaddress.
domain_name - Specifies host name if configuration hostbased mode.
ipaddr - Specifies host ip address if configuring hostbased mode.
Only Administrator level users can issue this command.
Used to show ssh user information.
show ssh user authmode
The show ssh user command show the ssh user information.
None.
Only Administrator level users can issue this command.
613