D-Link xStack Reference Manual page 488

xStack
delete nlb multicast_fdb
Syntax
Description
Parameters
Restrictions
Example usage:
To delete NLB multicast FDB entry:
DGS-3627:admin# delete nlb multicast_fdb default 03-bf-01-01-01-01
Command: delete nlb multicast_fdb default 03-bf-01-01-01-01
Success.
DGS-3627:admin#
config nlb multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure NLB multicast MAC forwarding database:
DGS-3627:admin# config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Success.
DGS-3627:admin#
show nlb fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
delete nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr>
The delete nlb multicast_fdb command is used to delete the NLB multicast FDB entry.
<vlan_name 32> - Specify the VLAN of the NLB multicast FDB entry to be deleted.
vlanid <vlanid> - Specify the VLAN by VLAN ID.
<macaddr> - Specify the MAC address of the NLB multicast FDB entry to be deleted.
Only Administrator and Operator-level users can issue this command.
Use to configure the switch's NLB multicast FDB entry.
config nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr> [add | delete]
<portlist>
The config nlb multicast_fdb command is used to add or delete the forwarding ports for the
specified NLB multicast FDB entry.
vlan_name - Specify the VLAN of the NLB multicast FDB entry to be configured.
vlanid <vlanid> - Specify the VLAN by the VLAN ID.
<macaddr> - Specify the Mac address of the NLB multicast FDB entry to be configured.
add <portlist> - Specify a list of forwarding ports to be added.
delete <portlist> - Specify a list of forwarding ports to be removed.
Only Administrator and Operator-level users can issue this command.
Used to show NLB configured entry.
show nlb fdb
The show nlb fdb command is used to show the NLB Configured entry.
None.
None.
484