D-Link xStack Reference Manual page 604

xStack
disable ripng
Restrictions
Example usage:
To disable RIPng globally:
DGS-3627:admin# disable ripng
Command: disable ripng
Success.
DGS-3627:admin#
show ripng
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RIPng configurations:
DGS-3627:admin# show ripng
Command: show ripng
Global State
Method
Update Time
Expire Time
Garbage Collection Time
Interface
-----------------------------------------------------
int8
int14
Total Entries : 2
DGS-3627:admin#
config ripng
Purpose
Syntax
Description
Parameters
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Only Administrator and Operator-level users can issue this command.
This command is used to display the RIPng state on all or specified interfaces.
show ripng {ipif <ipif_name 12>}
This command displays the RIPng state on all or specified interfaces.
ipif - Specify that the RIPng configuration will be displayed on a specific interface.
None.
: Disabled
: Poison Reverse
: 30 seconds
: 180 seconds
: 120 seconds
State
Disabled
Disabled
This command is used to configure the RIPng algorithm and timer.
config ripng {method [no_horizon | split_horizon | poison_reverse] | update <sec 5-
65535> | expire <sec 1-65535> | garbage_collection <sec 1-65535>}(1)
This command is used to specify the RIPng method and timer.
update - The value (in seconds) of the update timer.
expire - The interval (in seconds) when the update expires.
Metric
1
1
600