Switch Port Commands - D-Link xStack Reference Manual

xStack
The switch port commands in the Command Line Interface (CLI) are listed (with the appropriate parameters) in the
following table.
Command
config ports
show ports
Each command is listed, in detail, in the following sections.
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Parameters
[<portlist> | all ] {medium_type [fiber | copper]} { speed[auto
{capability_advertised {10_half | 10_full | 100_half | 100_full | 1000_full } }|
10_half | 10_full | 100_half | 100_full | 1000_full {[master | slave]} ] |
auto_negotiation restart_an |flow_control [enable | disable] | learning [enable |
disable ] | state [enable | disable] | [description <desc 1-32> | clear_description]}
{<portlist>} {[description | err_disabled | auto_negotiation | details | media_type]}

SWITCH PORT COMMANDS

660
89