D-Link xStack Reference Manual page 102

xStack
debug bgp show flag
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example shows the BGP debug flag:
DGS-3627:admin# debug bgp show flag
Command: debug bgp show flag
Current BGP flags setting:
Peer FSM Event
OPEN Packet Receive
OPEN Packet Send
UPDATE Packet Receive
UPDATE Packet Send
KEEPALIVE Packet Receive
KEEPALIVE Packet Send
NOTIFY Packet Receive
NOTIFY Packet Send
REFRESH Packet Receive
REFRESH Packet Send
CAPABILITY Packet Receive
CAPABILITY Packet Send
Filter Info
Route MAP
Access List
Prefix List
ERROR Information
Zebros Debug Info
Other Normal Information.
DGS-3627:admin#
debug bgp all flag
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Configure all BGP debug flags' state to be enabled:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
This command is used to display the current BGP debugging flags' setting
debug bgp show flag
This command is used to display the current BGP debugging flags' setting
None.
Only Administrator level users can issue this command.
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
This command is used to set all BGP debugging flags to be disabled or enabled
debug bgp all flag [enable | disable]
This command is used to set all BGP debugging flags to be disabled or enabled
enable - Enable the BGP debug function
disable - Disable the BGP debug function
Only Administrator level users can issue this command.
98