D-Link xStack Reference Manual page 739

xStack
Example Usage:
To enable VRRP globally on the Switch:
DGS-3627:admin# enable vrrp
Command: enable vrrp
Success.
DGS-3627:admin#
Example usage:
To enable the virtual IP address to be pinged:
DGS-3627:admin# enable vrrp ping
Command: enable vrrp ping
Success.
DGS-3627:admin#
disable vrrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the VRRP function globally on the Switch:
DGS-3627:admin# disable vrrp
Command: disable vrrp
Success.
DGS-3627:admin#
Example usage:
To disable the virtual IP address from being pinged:
DGS-3627:admin# disable vrrp ping
Command: disable vrrp ping
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To disable the VRRP function on the Switch.
disable vrrp {ping}
This command will disable the VRRP function on the Switch.
{ping} – Adding this parameter to the command will stop the virtual IP address from being
pinged from other host end nodes to verify connectivity. This will only disable the ping
connectivity check function. To disable the VRRP protocol on the Switch, omit this
parameter.
Only Administrator and Operator-level users can issue this command.
735