D-Link xStack Reference Manual page 365

xStack
DGS-3627:admin# disable address_binding trap_log
Command: disable address_binding trap_log
Success.
DGS-3627:admin#
config address_binding recover_learning ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To recover IMPB checking for ports 6 to 7:
DGS-3627:admin# config address_binding recover_learning ports 6-7
Command: config address_binding recover_learning ports 6-7
Success.
DGS-3627:admin#
enable address_binding nd_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the ND snooping function on the switch:
DGS-3627:admin# enable address_binding nd_snoop
Command: enable address_binding nd_snoop
Success.
DGS-3627:admin#
disable address_binding nd_snoop
Purpose
Syntax
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to recover IMPB checking.
config address_binding recover_learning ports [ <portlist> | all]
Use this command to recover the IMPB check function, which was previously stopped.
ports - See below:
<portlist> - Specify the list of ports that need to recover the IMPB check.
all - Indicates all the ports on the Switch.
Only Administrator and Operator-level users can issue this command.
Use to enable ND snooping on the switch.
enable address_binding nd_snoop
This command allows the user to enable ND snooping on the switch.
None.
Only Administrator and Operator-level users can issue this command.
Use to disable ND snooping on the switch.
disable address_binding nd_snoop
361