D-Link xStack Reference Manual page 109

xStack
DGS-3627:admin# debug bgp show network
Command: debug bgp show network
Network
-------------
192.168.0.0/8
172.16.0.0/16
Total Entries :2
DGS-3627:admin#
debug bgp show aggregate
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Configure BGP to show the current aggregate's information:
DGS-3627:admin# debug bgp show aggregate
Command: debug bgp show aggregate
Network Summary Only
------------- ------------
192.168.0.0/8 YES
172.16.0.0/16 NO
Total Entries :2
DGS-3627:admin#
debug bgp show damp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Configure BGP to show the current dampening information:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Route Map
-----------
NULL
map1
This command is used to display the current aggregate's configuration in the BGP protocol
stack.
debug bgp show aggregate
This command is used to display the current aggregate's configuration in the BGP protocol
stack.
None.
Only Administrator level users can issue this command.
AS Set
-------
NO
NO
This command is used to display the current dampening configuration and corresponding
dynamic information in the BGP protocol stack.
debug bgp show damp
This command is used to display the current dampening configuration and corresponding
dynamic information in the BGP protocol stack
None.
Only Administrator level users can issue this command.
Suppress Count
-------------
0
0
105