Link Layer Discovery Protocol (Lldp) Commands - D-Link DXS-3600-16S Manual

Link Layer Discovery Protocol (LLDP) Commands

32-1 lldp run
This command is used to enable the Link Layer Discovery Protocol (LLDP) globally. Use the no form of this command
to return to the default settings.
lldp run
no lldp run
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#lldp run
DXS-3600-32S(config)#
Example
DXS-3600-32S#configure terminal
XS-3600-32S(config)#no lldp run
DXS-3600-32S(config)#
32-2 lldp forward
This command is used to enable the Link Layer Discovery Protocol (LLDP) forward state. Use the no form of this
command to return to the default settings.
lldp forward
no lldp forward
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#lldp forward
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
LLDP global state is disabled.
Global Configuration Mode.
Level: 12
This is a global control for the LLDP function. When this function is enabled, the
switch can start to transmit LLDP packets and receive and process the LLDP
packets.
The specific function of each physical interface will depend on the LLDP setting of
each physical interface.
For the advertisement of LLDP packets, the switch announces the information to its
neighbor through physical interfaces. For the receiving of LLDP packets, the switch
will learn the information from the LLDP packets advertised from the neighbor in the
neighbor table.
This example shows how to enable the LLDP global setting.
This example shows how to disable the LLDP global setting.
None.
LLDP forward state is disabled.
Global Configuration Mode.
Level: 12
This is a global control for the LLDP forward. When LLDP is disabled and LLDP
forward is enabled, the received LLDPDU packet will be forwarded.
This example shows how to enable the LLDP global forward state.
309