D-Link xStack Reference Manual page 312

xStack
DGS-3627:admin# show qinq ports 1:1-1:4
Command: show qinq ports 1:1-1:4
Port Role Missdrop
----- ------ --------
1:1 Normal Disabled
1:2 Normal Disabled
1:3 Normal Disabled
1:4 Normal Disabled
DGS-3627:admin#
delete vlan_translation ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete VLAN translation rule on ports 1-4:
DGS-3627:admin# delete vlan_translation ports 1-4
Command: delete vlan_translation ports 1-4
Success.
DGS-3627:admin#
show vlan_translation
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show C-VLAN based VLAN translation rules in the system:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
TPID
-----------
0x8100
0x8100
0x8100
0x8100
Used to delete existed VLAN translation rules.
delete vlan_translation ports [ <portlist> | all ] { cvid <vidlist> }
The delete vlan_translation command is used to delete translation relationship between C-
VLAN and S-VLAN.
ports - The translation rule for the specified ports.
cvid - The rules for the specified CVIDs. If CVID is not specified, all rules configured for the
port will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to show existed C-VLAN based VLAN translation rules.
show vlan_translation {[ports <portlist>}
Used to show existed C-VLAN based VLAN translation rules.
ports - The C-VLAN based VLAN translation rule of the ports.
None.
Use Inner Priority
------------------
Disabled
Disabled
Disabled
Disabled
308