D-Link xStack Reference Manual page 174

xStack
DGS-3627:admin# config authentication ports all auth_mode host_based vlanid 1-3 state
enable
Command: config authentication ports all auth_mode host_based vlanid 1-3 state enable
Success.
DGS-3627:admin#
show authentication guest_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays the guest VLAN setting:
DGS-3627:admin# show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID
Guest VLAN Member Ports
Guest VLAN VID
Guest VLAN Member Ports
Total Entries: 2
DGS-3627:admin#
show authentication ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
This example displays authentication setting for all ports:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to show guest VLAN setting.
show authentication guest_vlan
The show guest VLAN command allows you to show the information of guest VLAN.
None.
None.
: 1
: 4
: 3
: 1,8
Used to display authentication setting on port(s).
show authentication ports {<portlist>}
User can use this command to display authentication method and authorization mode on
ports.
portlist - Display compound authentication on specify port(s).
If not specify the port, displays compound authentication setting of all ports.
None.
170