D-Link xStack Reference Manual page 278

xStack
show erps
Parameters
Restrictions
Example usage:
To display ERPS information:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
failure is detected on the port and traffic is blocked by ERPS.
The RPL owner administrative state could be configured to "Enabled" or "Disabled". But the
RPL owner operational state may be different from the RPL owner administrative state, for
example, the RPL owner conflict occurs. "Active" is used to indicate that the RPL owner
administrative state is enabled and the device is operated as the active RPL owner. "Inactive"
is used to indicate that the RPL owner administrative state is enabled, but the device is
operated as the inactive RPL owner.
raps_vlan <vlanid> - Specifies the R-APS VLAN.
sub_ring - Display sub-ring configuration information.
None.
274