D-Link xStack Reference Manual page 138

xStack
DGS-3627:admin# create bgp neighbor peer_group local1
Command:4#create
Success.
DGS-3627:admin# create bgp neighbor 10.2.2.2 remote_as 10
Command:4#create
Success.
DGS-3627:admin# config bgp peer_group local1 add 10.2.2.2
Command:4#config bgp peer_group local1 add 10.2.2.2
Success.
DGS-3627:admin# show bgp peer_group local1
Command:4#show bgp peer_group local1
BGP Peer Group :local1
-----------------------------------------------------------------------
Description
Session State
Session Activity
Members
Remote AS
Advertisement Interval
Keepalive Interval
Holdtime Interval
AS Origination Interval
Connect Retry Interval
EBGP Multihop
Weight
Update Source
Next Hop Self
Route Reflector Client
Send Community
Remove Private As
AllowAS In
Soft Reconfiguration Inbound
Unsuppressed Map
Default Originate
Incoming Update Prefix List
Incoming Update Filter List
Route Map for outgoing Routes : routemap1
Outbound Route Filter (ORF) type (64) Prefix-list:
Send Mode
Receive Mode
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
DGS-3627:admin#
config bgp route_reflector cluster_id
Purpose
Syntax
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
bgp neighbor peer_group local1
bgp neighbor 10.2.2.2 remote_as 10
:
: Enabled
: Enabled
: 10.2.2.2
: Not Set
: 30 seconds
: 60 seconds.
: 180 seconds.
: 15 seconds
: 120 seconds
: 1
: 0
: ipif1
: Disabled
: Disabled
: None
: Disabled
: Disabled
:Disabled
: usmap1
: Disabled
: prelist1
: ASlist1
: Enabled
: Disabled
: 12000
: 75
: Disabled
This command is used to configure the BGP process's global attribute.
config bgp route_reflector cluster_id <ipaddr>
134