D-Link xStack Reference Manual page 530

xStack
DGS-3627:admin# debug ospf show summary_list
Command: debug ospf show summary_list
OSPF Summary List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
LSID: 1.1.1.1 RTID: 1.1.1.1
Circuit: 2.2.2.1
Circuit: 10.1.1.6
DGS-3627:admin#
debug ospf show detail
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display current OSPF router link LSA detail information:
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
IP: 1.1.1.2
It is used to display LSAs with detail information. This command can be used if the route
calculation is not correct.
debug ospf show detail [rt_link | net_link | summary_link | external_link | type7_link]
This command is used to display LSAs with detail information.
rt_link - Display all Router LSAs with detail information.
net_link - Display all Network LSAs with detail information.
summary_link - Display all Summary LSAs with detail information.
external_link - Display all AS external LSAs with detail information.
type7_link - Display all type-7 LSAs with detail information.
Only Administrator level users can issue this command.
526