D-Link xStack Reference Manual page 692

xStack
upload attack_log_toTFTP
Description
Parameters
Restrictions
Example usage:
To upload the master's dangerous log:
DGS-3627:admin# upload attack_log 10.90.90.1 dest_file C:\alert.txt
Command: upload attack_log 10.90.90.1 dest_file C:\alert.txt
Success.
DGS-3627:admin#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
This command is used to upload the attack log on a unit.
ipaddr - The IP address of the TFTP server.
ipv6addr - The IPV6 address of the TFTP server.
domain_name - The domain name of the TFTP server.
dest_file - Used to identify the parameter "path_filename".
path_filename - Specifies the path name on the TFTP server to hold the attack log.
unit - The attack log messages on the specified unit will be uploaded to the TFTP server. If it
is not specified, it refers to the master unit.
Only Administrator and Operator-level users can issue this command.
688