D-Link xStack Reference Manual page 430

xStack
DGS-3627:admin# show lldp local_ports 1
Command: show lldp local_ports 1
Port ID : 1:1
----------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
CTRL+C ESC q Quit
show lldp remote_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display remote table in brief mode:
DGS-3627:admin# show lldp remote_ports 1-2 mode brief
Command: show lldp remote_ports 1-2 mode brief
Port ID: 1:1
----------------------------------------------------------------------
Remote Entities Count
Entity 1
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
CTRL+C ESC q Quit
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
SPACE n Next Page
Used to display the information learned from the neighbor.
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
This command display the information learned from the neighbor parameters. Due to a
memory limitation, only 32 VLAN Name entries and 10 Management Address entries can be
received.
<portlist> – Use this parameter to define ports to be configured.
mode – Choose from three options:
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
None.
: 1
SPACE n Next Page
: Local
: 1/1
:
: 1
: 1
: 0
: 1
: 0
: (See Detail)
: (See Detail)
: 1536
Enter Next Entry a
: MAC Address
: 00-01-0-2-03-04-01
: Local
: 1/3
: RMON Port 1 on Unit 3
Enter Next Entry a
426
All
All