Removing All User Names From A Zone Database; Duplicating A Zone - Brocade Communications Systems Brocade 8/12c User Manual

Removing all user names from a zone database

Use this procedure to remove all user names from the selected offline zone database.
1. Select Configure > Zoning > Fabric.
2. Select an FC fabric from the Zoning Scope list.
3. Select a zone database that you have checked out (your user name is in the Current User
4. Select Undo CheckOut from the Zone DB Operation list.
5. Click Yes in the confirmation message.
6. Click OK to save your work and close the Zoning dialog box.

Duplicating a zone

When you duplicate a zone, you make a copy of it in the same zone database. The first time a zone
is duplicated, the duplicate is automatically given the name <zonelabel>_copy. On subsequent
times, a sequential number is assigned to the zone name, such as <zonelabel>_copy_1,
<zonelabel>_copy_2, and <zonelabel>_copy_3.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select one or more zones in the Zones list that you want to duplicate, then right-click and
5. (Optional) Type a new name for the zone.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
databases for the selected entity.
column) in the Zone DB list.
This removes the user names of users currently logged in to the client from the Current User
column for this zone database.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
select Duplicate.
The duplicated zone or zones display in the Zones list.
If you key in a new name, press Enter to save the name.
Depending on the characters included in the name you enter, a message may display informing
you the name contains characters that are not accepted by some switch vendors, and asking
whether you want to proceed. Click Yes to continue, or No to cancel the renaming. (For zone
name requirements and limitations, refer to
Zoning administration
"Zoning naming conventions"
19
on page 581.)
619