Finding Zones In A Zone Configuration; Finding A Zone Configuration Member In The Zones List - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

20
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
5. Click Find < between the Potential Members list and the Zones list.

Finding zones in a zone configuration

Use this procedure to locate all instances of a zone in the Zone Configs list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone you want to find in the Zones list.
5. Click Find > between the Zones list and the Zone Configs list.

Finding a zone configuration member in the zones list

Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select an FC fabric from the Zoning Scope list.
4. Select the zone configuration member (i.e., the zone) in the Zone Configs list that you want to
5. Click Find < between the Zones list and the Zone Configs list.
608
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the member is found, it is highlighted in the Potential Members list.
•
If the member is not found, a message displays informing you of this. Click OK to close the
message box.
•
If there are no ports listed in the Potential Members list, a message displays informing you
that additional action is required. Right-click within the list panel and select Port Display
from the shortcut menu to display ports.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the zone is found, all instances of the zone are highlighted in the Zone Configs list.
•
If the zone is not found, a message displays informing you of this. Click OK to close the
message box.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
find in the Zones list.
Press SHIFT or CTRL and click each zone to select more than one zone.
•
If the zone is found, it is highlighted in the Zones list.
DCFM Professional Plus User Manual
53-1001774-01