Contact Closure Group (#612) - Avaya PARTNER ACS Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Figure 9-6. Connecting the Contact Closure Adjunct

Contact Closure Group (#612)

Use this feature to specify which system extensions can activate each Contact Closure. Before a
user can activate a contact closure, you must assign the user's extension to the Contact Closure
Group (#612) for that Contact Closure.
Considerations
If a Contact Closure is used to control a door lock and a doorphone is installed at that door,
I
you may want to assign the extensions in the Contact Closure Group to also be the
Doorphone Alert Extensions (#606) for that doorphone.
When an extension is included in the appropriate Contact Closure Group, the user at that
I
extension can use Contact Closure to activate the contact closure device.
Programming
To assign extensions to a Contact Closure Group:
f00ss#612
1. Press
2. At the Contact Number : prompt, enter the number for the Contact Closure (1 or 2).
3. At the Extension : prompt, enter the two-digit extension number that you want to assign to
this Contact Closure Group.
4. To assign or unassign the extension, press
1 = Assigned to the Contact Closure Group
I
2 = Not Assigned to the Contact Closure Group (the factory setting) ✔
I
Contact Closure Adjunct
9-10
Contact
Closure Jack
Contact
Closure
Adjunct
00
NE R 30
jun ct
PA RT
ur e Ad
ct Cl os
Co nta
D
at extension 10 or 11.
until the appropriate value appears: