Message Assignment Considerations - Avaya CS700 Administration And Maintenance

Exchange 5.1
Hide thumbs Also See for CS700:
Table of Contents

Advertisement

Managing Annunciator Messages
File
Number
437
438

Message Assignment Considerations

Callers dialing in to an attended conference hear the greeting message once. Those answering
a blast are either placed immediately into the conference or hear a repeating message
depending on configuration. Callers dialing in to an unattended conference hear the message at
the beginning of each scan cycle specified for the scheduler (see
Scheduler
on page 173.
By default, the system plays message 1 on each port entering the system, with the following
exceptions:
The system automatically plays message 242 to blast conferees unless specified
otherwise by the operator when initiating the blast.
The system plays message 247 as the PIN code prompt for channels hosting unattended
conferences with PIN codes security in effect.
Assigning 0 to a channel disables annunciator messages for that channel.
For an attended line, the system immediately places the caller in the Enter Queue upon
dial in.
For an Automatic Conference Select (ACS)-enabled line, the system places the caller
directly into the conference upon dial in.
For Call Routing-enabled channels, the system ignores any annunciator that may be
assigned to the channels as described in this chapter and plays instead the message
specified by the Message parameter for the Call Branding configuration.
Note:
You can configure annunciator messages for up 3000 DNIS/DDI patterns for
Note:
conferee channels using the system's Call Routing feature.
Consider the following when working with voice messages:
Some messages play to individual lines (line messages), other messages play to the
entire conference (conference messages).
When a conference message plays, all lines in the conference are muted.
You can play a continuously looping "on hold" message in the Enter Queue.
114 Administration and Maintenance of the S700/780 Audio Conferencing Server
Message
Message
Number
438
The conference will now be
439
Please enter your 'second billing code' followed by the pound key.
disconnected.
Working with the Conference
14 of 14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs780

Table of Contents