Software Configuration
The Management application allows you to configure the following software settings:
•
•
•
•
•
•
•
Client export port
You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select Server > Options.
FIGURE 39
2. Select Client Export Port to assign a communications port between the client and server in the
DCFM Enterprise User Manual
53-1001775-01
Client export port—A port for communication between the client and server.
Discovery—HTTP or HTTP over SSL when connecting to the switch.
FTP/SCP overview—Internal or external FTP server settings.
IP Configuration—Configure the Ethernet ports with the IP address.
Memory allocation—Memory allocation for the client and server.
Server port—Server port settings.
Support mode—Support settings to allow enhanced diagnostics.
The Options dialog box displays
Options dialog box (Client Export Port option)
Category list.
(Figure
39).
Software Configuration
3
87