Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 679

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Speed Dial
Pools
Recall/Timed Flash
Saved Number Dial
Second Dial Tone
Timer
Service Observing
SMDR
Transfer
UDP Features
A pool dial-out code can be programmed on Personal Speed Dial and
System Speed Dial numbers. When a pool dial-out code is included in the
number dialed, Pause characters may immediately follow the dial-out
code to allow time to receive a local telephone company dial tone.
The Conf button is used to enter the Flash special character, which
simulates pressing the Recall button in a Personal Speed Dial or System
Speed Dial telephone number.
Telephone numbers that are dialed by using a Personal Speed Dial code
are stored by Saved Number Dial. If the number includes a special
character, such as Pause or Stop, the special characters do not work
when the number is redialed by using Last Number Dial. Telephone
numbers that are dialed by using a System Speed Dial code are not
stored by Saved Number Dial.
Marked System Speed Dial entries—entries that do not display—are not
affected by the Second Dial Tone setting. If the central office does not
immediately supply dial tone when a star code is entered and a marked
System Speed Dial entry uses star codes, then the appropriate number of
pauses (each 1.5 seconds) must be programmed in the entry following
each star code.
In Release 6.1 and later systems, if an extension uses Personal or
System Speed Dial to place a call, the call can be observed.
When Personal Speed Dial or System Speed Dial is used to dial an
outgoing call, the actual digits dialed by the system appear on the report.
However, when a marked System Speed Dial number is used, the Speed
Dial code, rather than the digits dialed, prints on the report.
Both Personal and System Speed Dial can be used to dial a transfer
destination.
In Release 6.0 and later systems (Hybrid/PBX mode only), non-local dial
plan numbers can be programmed as speed dial numbers. System Speed
Dial numbers can only be accessed by local system users.
Issue 1
August 1998
Page 630