Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 678

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Speed Dial
Authorization Code
Automatic Route
Selection
Callback
Calling Restrictions
Conference
Digital Data Calls
Directories
Drop
Hold
HotLine
Labeling
Last Number Dial
Users cannot enter authorization codes by using a System Speed Dial or
Personal Speed Dial code because these features are activated by
dialing . Pressing
cannot also be used to activate speed dial features.
Personal Speed Dial and System Speed Dial numbers can include the
ARS code.
When a Stop character is programmed as part of a Speed Dial number,
stay on the line, wait for the callback call, and then reactivate Speed Dial.
This signals the system to continue dialing the digits following the Stop
character.
When a marked System Speed Dial code is used to dial a number, any
calling restrictions (such as toll or outward restrictions) assigned to the
extension are overridden.
Press the Conf button to enter the Flash special character in a Personal
Speed Dial or System Speed Dial telephone number.
Personal and System Speed Dial codes can be used on digital
communications equipment (DCE).
Speed Dial codes can be used only on digital video systems that have the
ability to dial feature codes or number strings beginning with .
System Speed Dial numbers are stored in the System Directory. MLX
display telephone users can dial the numbers by selecting the name from
the display. If the number is on a marked System Directory listing, select
the listing and dial the number regardless of any calling restrictions (toll
and outward) assigned to the extension.
Press the Drop button to enter the Stop special character in a Personal
Speed Dial or System Speed Dial telephone number.
Press the Hold button to enter the Pause special character in Personal
Speed Dial or System Speed Dial telephone numbers.
A HotLine extension (Release 5.0 and later systems) can dial only the first
Personal Speed Dial number (code 01) programmed for the extension.
The end-of-dialing digit, #, should be programmed at the end of the speed
dial number. See Appendix H, "Programming Special Characters," for
additional information.
The telephone numbers associated with System Speed Dial codes are
entered by using the programming screens to program labels for System
Directory listings.
Telephone numbers that are dialed by using Personal Speed Dial are
stored by Last Number Dial. However, if the stored number includes a
special character, such as Pause or Stop, the special character does not
work when the number is redialed by using Last Number Dial. Telephone
numbers that are dialed by using a System Speed Dial code are not
stored by Last Number Dial.
completes the entry of an authorization code and
Issue 1
August 1998
Page 629