Lucent Technologies MERLIN LEGEND Release 6.1 Feature Reference page 327

MERLIN LEGEND Communications System Release 6.1
Feature Reference 555-661-110
Features
Do Not Disturb
Display
Forward and
Follow Me
Group Calling
Headset Options
Messaging
Multi-Function
Module
Labeling
Paging
Reminder Service
In Release 2.0 and later systems, when a multiline telephone user with
coverage turns on Do Not Disturb and calls are sent to coverage
receivers, the receiver with a display sees a message when answering
the call; it shows that the call has been redirected because the sender
turned on Do Not Disturb.
If a display telephone user tries to transfer a call to a user with Do Not
Disturb active, the display shows
Calls are not forwarded to a destination extension that has Do Not Disturb
turned on; the call rings only at the forwarding telephone as described in
Table 22, page 297. Turning on Do Not Disturb at the forwarding
extension does not prevent the calls from being forwarded.
In Release 4.0 and later systems, turning on Do Not Disturb at a
forwarding extension causes calls to be forwarded immediately. The
Forwarding Delay has no effect.
If a calling group member uses Do Not Disturb, calls are not sent to the
group member even if he or she is logged in and available.
If an MLX telephone user with Headset Auto Answer uses Do Not Disturb,
any calls that override Do Not Disturb (such as Barge-In calls and
callback calls) are automatically answered.
In Release 2.0 and later systems, when Do Not Disturb is turned on, the
system automatically posts
the Home screen of an MLX display telephone user with Do Not Disturb
turned on. It also appears on the screen of any inside caller with a display
telephone who calls a user with the feature turned on. The system
automatically removes the message when the user turns off the feature.
Users with analog multiline, MLX-10, or MLX-5 nondisplay telephones
must program a Posted Messages button for the system to automatically
post or remove the message when the feature is turned on or off. A user
can post or remove a Do Not Disturb message by pressing a programmed
Posted Messages button.
Posting the
removing the posted message does not turn the feature off.
Using Do Not Disturb is not recommended because the device connected
to the MFM does not have an LED to indicate when the feature is active.
Labeling is used to enter the names of the persons or businesses
associated with the System Speed Dial numbers stored as listings in the
System Directory. It is also used to enter the names of people, groups,
and locations associated with the extensions in the system stored as
listings in the Extension Directory. Labeling is used to enter the telephone
numbers and label information associated with Personal Directories on
MLX-20L telephones. This information can also be programmed by the
user at the extension.
Group pages cannot be made to a telephone with Do Not Disturb on.
Reminder calls ring at telephones with Do Not Disturb turned on.
. This message appears on
message does not turn the feature on;
Issue 1
August 1998
Page 278
.